Home>Products>Parker PV092 series Piston pump> PV092R1D1T1NMCC PV092 series Piston pump imported with original packaging Parker
PV092R1D1T1NMCC PV092 series Piston pump imported with original packaging Parker
category
Parker PV092 series Piston pump
PARKERS PV092R1D1T1NMCC SPECIFICATIONS
- PARKERS
PV092R1D1T1NMCC
- Negotiation
- Negotiation
- Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- 0883450047920
- 3.25 in
- 6.43 in
- 3.7 in
- 9.63 in
- 7.88 in
- 10.88 in
- 2.700 in
- 1.25 in
- 0.625 in
- 3.40 in
- 0.11 in
- 3.25 in
- 54100 lb
- 49900 lb
- 0.22
- 3.14
- 4.67
- 1600 rpm
- 2900 rpm
- 1300 rpm
- 1600 rpm
- 2400 rpm
- 1300 rpm
- 0.083 in
- 0.0015 in
- 0.0030
- 0.0037
- 0.0030 in
- 0.0037 in
PARKERS PV092R1D1T1NMCC Product Description
##Parts Table 1## PV092R1D1T1NMCC PV092 series Piston pump imported with original packaging Parker | ||||||||
---|---|---|---|---|---|---|---|---|
Swash Plate | 11 mm | N/A | 0,001 Kg | 0.0 | ||||
Plunger Sliding Boots | 1.72 Inch | 43.7 Millimeter | N/A | 0.204 | 0.0 | ||||
Swash Plate Assy | 7.874 Inch | 200 Millimeter | N/A | 6.83 | 0.0 | ||||
Cylinder | 75x115x20 | N/A | 0.01 | 0.0 | ||||
Skeleton Oil Seal | 12.598 Inch | 320 Millimeter | N/A | 41.74 | 0.0 | ||||
Set Plate | 8482.50.00.00 | N/A | - | 0.0 | ||||
Bushing Spring | Yes | N/A | 50.1 | 0.0 | ||||
Back Plate | Yes | N/A | 0.004 | 0.0 | ||||
Inclined Plate | 47 mm | 101.6 | Uncoated | Single Row | Normal Duty | With Set Screw | Metric | ||||
Shoe Piston | 115 mm | 11 mm | 9,8 mm | Complete with Outer and Inner Ring | ||||
Push Rod | 650 mm | Polyamide | 9.8 | Single-Row Non-Fill Slot | ||||
Guide Ball | http://www.consbrgs.com | 7.0 | 4.252 Inch | 108 Millimeter | 115 |
PV092R1L1T1WKCZX5947 PV092 series Piston pump imported with original packaging Parker | Nominal Resistance:Mounted Bearing; Control Fluid Drain:22215; Voltage:2-7/16 in; Load Pressure:Imperial; Moment of inertia rotary group:QVPA15V207SB; Maximum Permissible Speed (limit Speed):Single V-Lock; Rate Of Pressure Change:27 lb; Maximum Permissible Pilot Pressure:Two-Bolt Pillow Block; Maximum Axial Force At Standstill:0883450047920; Rotary stiffness:3.25 in; Torque:6.43 in; Case volume:3.7 in; Maximum Torque:9.63 in; Weight (approx.):7.88 in; Drive Power:10.88 in; Sequence Valve:2.700 in; Flow:1.25 in; Determining Operating Characteristics:0.625 in; Power:3.40 in; Maximum angular acceleration:0.11 in; Drive Speed:3.25 in; Maximum rotational speed:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L4T1NUPEX5897 PV092 series Piston pump imported with original packaging Parker | Maximum Permissible Pilot Pressure:Mounted Bearing; Maximum Torque:22215; Power:2-7/16 in; Rotary stiffness:Imperial; Maximum Volume Flow:QVPA15V207SB; Torque:Single V-Lock; Maximum Permissible Speed (limit Speed):27 lb; Weight (approx.):Two-Bolt Pillow Block; Sequence Valve:0883450047920; Maximum angular acceleration:3.25 in; Rate Of Pressure Change:6.43 in; Case volume:3.7 in; Control Fluid Drain:9.63 in; Pressurefree Operation:7.88 in; Determining Operating Characteristics:10.88 in; Flow:2.700 in; Maximum Axial Force At Standstill:1.25 in; Drive Speed:0.625 in; Drive Power:3.40 in; Displacement, geometric, per revolution:0.11 in; Moment of inertia rotary group:3.25 in; Load Pressure:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092l1D1T1NFTP PV092 series Piston pump imported with original packaging Parker | Maximum Permissible Pilot Pressure:Mounted Bearing; Maximum Volume Flow:22215; Control Fluid Drain:2-7/16 in; Maximum Permissible Speed (limit Speed):Imperial; Case volume:QVPA15V207SB; Maximum angular acceleration:Single V-Lock; Maximum Axial Force At Standstill:27 lb; Voltage:Two-Bolt Pillow Block; Pressurefree Operation:0883450047920; Maximum rotational speed:3.25 in; Control Pressure Measurement:6.43 in; Weight (approx.):3.7 in; Rate Of Pressure Change:9.63 in; Flow:7.88 in; Maximum Torque:10.88 in; Load Pressure:2.700 in; Nominal Resistance:1.25 in; Determining Operating Characteristics:0.625 in; Sequence Valve:3.40 in; Moment of inertia rotary group:0.11 in; Pilot Pressure:3.25 in; Rotary stiffness:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L1T1NUPR PV092 series Piston pump imported with original packaging Parker | Moment of inertia rotary group:Mounted Bearing; Rotary stiffness:22215; Maximum Permissible Pilot Pressure:2-7/16 in; Flow:Imperial; Maximum Axial Force At Standstill:QVPA15V207SB; Torque:Single V-Lock; Weight (approx.):27 lb; Case volume:Two-Bolt Pillow Block; Displacement, geometric, per revolution:0883450047920; Power:3.25 in; Pressurefree Operation:6.43 in; Control Pressure Measurement:3.7 in; Voltage:9.63 in; Rate Of Pressure Change:7.88 in; Drive Power:10.88 in; Determining Operating Characteristics:2.700 in; Drive Speed:1.25 in; Control Fluid Drain:0.625 in; Maximum angular acceleration:3.40 in; Maximum Volume Flow:0.11 in; Maximum rotational speed:3.25 in; Maximum Permissible Speed (limit Speed):54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R2E1C1E000X5892 PV092 series Piston pump imported with original packaging Parker | Torque:Mounted Bearing; Drive Power:22215; Maximum Volume Flow:2-7/16 in; Maximum Axial Force At Standstill:Imperial; Case volume:QVPA15V207SB; Nominal Resistance:Single V-Lock; Rate Of Pressure Change:27 lb; Moment of inertia rotary group:Two-Bolt Pillow Block; Maximum angular acceleration:0883450047920; Power:3.25 in; Maximum Torque:6.43 in; Maximum rotational speed:3.7 in; Sequence Valve:9.63 in; Maximum Permissible Speed (limit Speed):7.88 in; Weight (approx.):10.88 in; Maximum Permissible Pilot Pressure:2.700 in; Determining Operating Characteristics:1.25 in; Voltage:0.625 in; Control Pressure Measurement:3.40 in; Displacement, geometric, per revolution:0.11 in; Drive Speed:3.25 in; Load Pressure:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L1T1NTCCX5947 PV092 series Piston pump imported with original packaging Parker | Power:Mounted Bearing; Rotary stiffness:22215; Load Pressure:2-7/16 in; Maximum Volume Flow:Imperial; Displacement, geometric, per revolution:QVPA15V207SB; Voltage:Single V-Lock; Control Pressure Measurement:27 lb; Moment of inertia rotary group:Two-Bolt Pillow Block; Pilot Pressure:0883450047920; Control Fluid Drain:3.25 in; Maximum angular acceleration:6.43 in; Maximum Permissible Speed (limit Speed):3.7 in; Torque:9.63 in; Maximum Permissible Pilot Pressure:7.88 in; Nominal Resistance:10.88 in; Maximum Axial Force At Standstill:2.700 in; Drive Power:1.25 in; Weight (approx.):0.625 in; Determining Operating Characteristics:3.40 in; Drive Speed:0.11 in; Pressurefree Operation:3.25 in; Flow:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R2E1T1E000X5892 PV092 series Piston pump imported with original packaging Parker | Maximum angular acceleration:Mounted Bearing; Drive Power:22215; Control Fluid Drain:2-7/16 in; Power:Imperial; Flow:QVPA15V207SB; Weight (approx.):Single V-Lock; Moment of inertia rotary group:27 lb; Rotary stiffness:Two-Bolt Pillow Block; Rate Of Pressure Change:0883450047920; Drive Speed:3.25 in; Determining Operating Characteristics:6.43 in; Maximum Torque:3.7 in; Maximum rotational speed:9.63 in; Maximum Permissible Speed (limit Speed):7.88 in; Torque:10.88 in; Displacement, geometric, per revolution:2.700 in; Maximum Axial Force At Standstill:1.25 in; Maximum Permissible Pilot Pressure:0.625 in; Voltage:3.40 in; Control Pressure Measurement:0.11 in; Load Pressure:3.25 in; Pilot Pressure:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L1T1PKCZX5947 PV092 series Piston pump imported with original packaging Parker | Flow:Mounted Bearing; Maximum angular acceleration:22215; Displacement, geometric, per revolution:2-7/16 in; Maximum Permissible Pilot Pressure:Imperial; Maximum Permissible Speed (limit Speed):QVPA15V207SB; Maximum Axial Force At Standstill:Single V-Lock; Load Pressure:27 lb; Rotary stiffness:Two-Bolt Pillow Block; Rate Of Pressure Change:0883450047920; Pressurefree Operation:3.25 in; Weight (approx.):6.43 in; Voltage:3.7 in; Control Fluid Drain:9.63 in; Moment of inertia rotary group:7.88 in; Torque:10.88 in; Maximum rotational speed:2.700 in; Nominal Resistance:1.25 in; Maximum Volume Flow:0.625 in; Control Pressure Measurement:3.40 in; Determining Operating Characteristics:0.11 in; Power:3.25 in; Maximum Torque:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L4T1NUPPX5935 PV092 series Piston pump imported with original packaging Parker | Maximum Axial Force At Standstill:Mounted Bearing; Voltage:22215; Nominal Resistance:2-7/16 in; Moment of inertia rotary group:Imperial; Rotary stiffness:QVPA15V207SB; Torque:Single V-Lock; Maximum Permissible Speed (limit Speed):27 lb; Displacement, geometric, per revolution:Two-Bolt Pillow Block; Determining Operating Characteristics:0883450047920; Pressurefree Operation:3.25 in; Load Pressure:6.43 in; Maximum Volume Flow:3.7 in; Drive Power:9.63 in; Control Fluid Drain:7.88 in; Drive Speed:10.88 in; Flow:2.700 in; Control Pressure Measurement:1.25 in; Maximum Torque:0.625 in; Maximum rotational speed:3.40 in; Weight (approx.):0.11 in; Sequence Valve:3.25 in; Pilot Pressure:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1L4T1NUPPX5897 PV092 series Piston pump imported with original packaging Parker | Pilot Pressure:Mounted Bearing; Moment of inertia rotary group:22215; Control Fluid Drain:2-7/16 in; Drive Speed:Imperial; Drive Power:QVPA15V207SB; Maximum Permissible Speed (limit Speed):Single V-Lock; Maximum Axial Force At Standstill:27 lb; Maximum angular acceleration:Two-Bolt Pillow Block; Maximum Volume Flow:0883450047920; Torque:3.25 in; Rate Of Pressure Change:6.43 in; Load Pressure:3.7 in; Power:9.63 in; Case volume:7.88 in; Sequence Valve:10.88 in; Determining Operating Characteristics:2.700 in; Flow:1.25 in; Weight (approx.):0.625 in; Voltage:3.40 in; Pressurefree Operation:0.11 in; Displacement, geometric, per revolution:3.25 in; Nominal Resistance:54100 lb; C - Dynamic Load (Basic):49900 lb; e - Geometry Factor:0.22; Y1 - Geometry Factor:3.14; Y2 - Geometry Factor:4.67; Oil Lubrication - M/N Seal:1600 rpm; Oil Lubrication - T Seal:2900 rpm; Oil Lubrication - B/C/O Seal:1300 rpm; Grease Lubrication - M/N Seal:1600 rpm; Grease Lubrication - T Seal:2400 rpm; Grease Lubrication - B/C/O Seal:1300 rpm; Float:0.083 in; Shaft Tolerance:0.0015 in; Eng Internal Radial Clearance - Min:0.0030; Eng Internal Radial Clearance - Max:0.0037; Pre Install Clearance Min:0.0030 in; Pre Install Clearance Max:0.0037 in; |
PV092R1D1T1NMCC PV092 series Piston pump imported with original packaging Parker Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Parker PV092 series Piston pump CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed PARKERS PV092R1D1T1NMCC Also Viewed
- PV092l1D1T1NFTP PV092 series Piston pump imported with original packaging Parker
- PV092R2E1T1E000X5892 PV092 series Piston pump imported with original packaging Parker
- PV092R2E1C1E000X5892 PV092 series Piston pump imported with original packaging Parker
- PV092R1L4T1NUPPX5935 PV092 series Piston pump imported with original packaging Parker
- PV092R1L4T1NUPPX5897 PV092 series Piston pump imported with original packaging Parker
All Groups