English- Home
- Stock Categories
- Quality Control
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
Home>Products>Parker Piston pump PV020 series> PV028R1K1T1NMMZ+PVAC2PCM imported with original packaging Parker Piston pump PV020 series
PV028R1K1T1NMMZ+PVAC2PCM imported with original packaging Parker Piston pump PV020 series
category
Parker Piston pump PV020 series
PARKERS PV028R1K1T1NMMZ+PVAC2PCM SPECIFICATIONS
- PARKERS
PV028R1K1T1NMMZ+PVAC2PCM
- Negotiation
- Negotiation
-
Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- 12.1 mm
- 11.5 mm
- 17.9 mm
- 0.5 mm
- 4.25 mm
- 0.3 mm
- 0.15 mm
- 7.1 mm
- 10 mm
- 10 mm
- 20 mm
- 20.6 mm
- 0.3 mm
- 0.15 mm
- 13.3 mm
- 2.3 kN
- 0.765 kN
- 0.032 kN
- 98000 r/min
- 150000 mm/min
- 3.969 mm
- 8
- 0.17 cm3
- 0.68
- 1.41
- 0.76
- 0.67
- 0.92
- 20 N
- 60 N
- 120 N
- 1.02
- 0.99
- 1
- 1.03
- 1.06
- 1
- 23 N/micron
- 34 N/micron
- 45 N/micron
- 12.1 mm
- 11.5 mm
- 17.9 mm
- 4.25 mm
- 0.3 mm
- 0.15 mm
- 10 mm
- 10 mm
- 20 mm
- 20.6 mm
- 0.3 mm
- 0.15 mm
- 13.3 mm
- 2.29 kN
- 0.765 kN
- 0.032 kN
- 98000 r/min
- 150000 r/min
- 3.969 mm
- 8
- 0.17 cm³
- 20 N
- 23 N/µm
- 60 N
- 34 N/µm
- 120 N
- 45 N/µm
- 1.02
- 0.99
- 1
- 1.03
- 1.06
- 1
- 0.68
- 0.87
- 0.38
- 0.41
- 0.92
- 1.41
- 0.76
- 0.67
- 0.012 kg
PARKERS PV028R1K1T1NMMZ+PVAC2PCM Product Description
##Parts Table 1## PV028R1K1T1NMMZ+PVAC2PCM imported with original packaging Parker Piston pump PV020 series | ||||||||
|---|---|---|---|---|---|---|---|---|
| Block Cylinder | 12 mm | 24 mm | 0,011 Kg | N/A | ||||
| Set Plate | 38.100 | 47.625 mm | 0.081 Kg | Contact Seal | ||||
| Rod | 2.756 Inch | 70 Millimeter | 5.906 Inch | 150 Millimeter | 2.83 | N/A | ||||
| Shoe Plates | 1,46 kN | RBEC 1 | ISO P0 | 7.595 | N/A | ||||
| Rotor | No | 2250 RPM | 42 | N/A | ||||
| The Thrust Plate | Triple Lip | 3.13 in | 442 | N/A | ||||
| Ball Guides | 2.6875 in | 7.6 to 9.1 in | TM820S-440 | 440 | ||||
| Gear Pump | 24 mm | 22215 | 1.46 kN | C0 | ||||
| Press Pin | 2.6875 in | 40.8 | 0.011 kg | 43,000 mm | ||||
| Servo Piston | 36.512mm | 76.2mm | 1 mm | 15,3 mm | ||||
| Plunger Sliding Boots | 10 mm | 30 mm | 8482.50.00.00 | 61 | ||||
| Swash Plate | A52 | 101.6 | 15.8 mm | 12 | ||||
| Friction Plate | C3-Loose | 2.91 kN | Sea water | Polymer | ||||
| PV020L1K1JHNMR1+PV020L1L imported with original packaging Parker Piston pump PV020 series | Flow:708 ACE/P4AH; Case volume:22x8x7; Rotary stiffness:22; Maximum Volume Flow:8; Moment of inertia rotary group:7; Maximum angular acceleration:8 mm; Drive Power:22 mm; Power:7 mm; Sequence Valve:12.1 mm; Torque:11.5 mm; Rate Of Pressure Change:17.9 mm; Weight (approx.):0.5 mm; Drive Speed:4.25 mm; Pilot Pressure:0.3 mm; Displacement, geometric, per revolution:0.15 mm; Pressurefree Operation:7.1 mm; Maximum Permissible Pilot Pressure:10 mm; Determining Operating Characteristics:10 mm; Maximum Permissible Speed (limit Speed):20 mm; Control Fluid Drain:20.6 mm; Maximum Axial Force At Standstill:0.3 mm; Nominal Resistance:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1K1AYNMMC4545+PGP5 imported with original packaging Parker Piston pump PV020 series | Weight (approx.):708 ACE/P4AH; Rotary stiffness:22x8x7; Nominal Resistance:22; Voltage:8; Maximum Torque:7; Maximum Volume Flow:8 mm; Load Pressure:22 mm; Rate Of Pressure Change:7 mm; Maximum Axial Force At Standstill:12.1 mm; Maximum Permissible Pilot Pressure:11.5 mm; Power:17.9 mm; Moment of inertia rotary group:0.5 mm; Flow:4.25 mm; Control Pressure Measurement:0.3 mm; Maximum rotational speed:0.15 mm; Maximum angular acceleration:7.1 mm; Displacement, geometric, per revolution:10 mm; Pressurefree Operation:10 mm; Pilot Pressure:20 mm; Control Fluid Drain:20.6 mm; Sequence Valve:0.3 mm; Determining Operating Characteristics:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1K1AYNMMW+PGP511A0 imported with original packaging Parker Piston pump PV020 series | Maximum Axial Force At Standstill:708 ACE/P4AH; Drive Speed:22x8x7; Weight (approx.):22; Maximum Torque:8; Control Pressure Measurement:7; Control Fluid Drain:8 mm; Pressurefree Operation:22 mm; Drive Power:7 mm; Maximum Permissible Speed (limit Speed):12.1 mm; Maximum Permissible Pilot Pressure:11.5 mm; Flow:17.9 mm; Torque:0.5 mm; Displacement, geometric, per revolution:4.25 mm; Pilot Pressure:0.3 mm; Rate Of Pressure Change:0.15 mm; Maximum Volume Flow:7.1 mm; Sequence Valve:10 mm; Rotary stiffness:10 mm; Voltage:20 mm; Nominal Resistance:20.6 mm; Power:0.3 mm; Load Pressure:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1D3BCNMRZ+PV020R1E imported with original packaging Parker Piston pump PV020 series | Moment of inertia rotary group:708 ACE/P4AH; Weight (approx.):22x8x7; Nominal Resistance:22; Maximum Torque:8; Maximum rotational speed:7; Rate Of Pressure Change:8 mm; Maximum Permissible Pilot Pressure:22 mm; Power:7 mm; Displacement, geometric, per revolution:12.1 mm; Control Fluid Drain:11.5 mm; Rotary stiffness:17.9 mm; Pressurefree Operation:0.5 mm; Maximum angular acceleration:4.25 mm; Determining Operating Characteristics:0.3 mm; Pilot Pressure:0.15 mm; Drive Speed:7.1 mm; Torque:10 mm; Maximum Axial Force At Standstill:10 mm; Flow:20 mm; Voltage:20.6 mm; Control Pressure Measurement:0.3 mm; Load Pressure:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1K1AYNMMC+PGP511A0 imported with original packaging Parker Piston pump PV020 series | Power:708 ACE/P4AH; Control Fluid Drain:22x8x7; Maximum Torque:22; Voltage:8; Weight (approx.):7; Torque:8 mm; Pilot Pressure:22 mm; Control Pressure Measurement:7 mm; Sequence Valve:12.1 mm; Drive Speed:11.5 mm; Nominal Resistance:17.9 mm; Load Pressure:0.5 mm; Rotary stiffness:4.25 mm; Maximum Axial Force At Standstill:0.3 mm; Displacement, geometric, per revolution:0.15 mm; Maximum angular acceleration:7.1 mm; Flow:10 mm; Maximum Permissible Pilot Pressure:10 mm; Pressurefree Operation:20 mm; Moment of inertia rotary group:20.6 mm; Maximum rotational speed:0.3 mm; Rate Of Pressure Change:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020L1K1T1NELZ+PVAC2MCM imported with original packaging Parker Piston pump PV020 series | Rotary stiffness:708 ACE/P4AH; Weight (approx.):22x8x7; Drive Power:22; Pressurefree Operation:8; Maximum Volume Flow:7; Power:8 mm; Sequence Valve:22 mm; Maximum Torque:7 mm; Determining Operating Characteristics:12.1 mm; Load Pressure:11.5 mm; Rate Of Pressure Change:17.9 mm; Maximum Permissible Speed (limit Speed):0.5 mm; Maximum rotational speed:4.25 mm; Torque:0.3 mm; Case volume:0.15 mm; Nominal Resistance:7.1 mm; Pilot Pressure:10 mm; Maximum Permissible Pilot Pressure:10 mm; Flow:20 mm; Displacement, geometric, per revolution:20.6 mm; Drive Speed:0.3 mm; Control Pressure Measurement:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1K1AYNMMC+PGP505A0 imported with original packaging Parker Piston pump PV020 series | Drive Power:708 ACE/P4AH; Sequence Valve:22x8x7; Voltage:22; Pilot Pressure:8; Maximum Permissible Pilot Pressure:7; Rotary stiffness:8 mm; Displacement, geometric, per revolution:22 mm; Maximum Permissible Speed (limit Speed):7 mm; Maximum Axial Force At Standstill:12.1 mm; Pressurefree Operation:11.5 mm; Maximum Volume Flow:17.9 mm; Nominal Resistance:0.5 mm; Maximum Torque:4.25 mm; Maximum rotational speed:0.3 mm; Control Fluid Drain:0.15 mm; Case volume:7.1 mm; Weight (approx.):10 mm; Moment of inertia rotary group:10 mm; Flow:20 mm; Power:20.6 mm; Maximum angular acceleration:0.3 mm; Load Pressure:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1E1BCNMFC+PV020R1E imported with original packaging Parker Piston pump PV020 series | Pilot Pressure:708 ACE/P4AH; Rate Of Pressure Change:22x8x7; Pressurefree Operation:22; Weight (approx.):8; Maximum angular acceleration:7; Power:8 mm; Maximum Axial Force At Standstill:22 mm; Sequence Valve:7 mm; Maximum Torque:12.1 mm; Control Pressure Measurement:11.5 mm; Load Pressure:17.9 mm; Nominal Resistance:0.5 mm; Control Fluid Drain:4.25 mm; Case volume:0.3 mm; Maximum Volume Flow:0.15 mm; Moment of inertia rotary group:7.1 mm; Displacement, geometric, per revolution:10 mm; Maximum Permissible Speed (limit Speed):10 mm; Flow:20 mm; Determining Operating Characteristics:20.6 mm; Torque:0.3 mm; Drive Speed:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020L1E1T1NMFC imported with original packaging Parker Piston pump PV020 series | Maximum Permissible Speed (limit Speed):708 ACE/P4AH; Control Pressure Measurement:22x8x7; Nominal Resistance:22; Moment of inertia rotary group:8; Maximum Permissible Pilot Pressure:7; Power:8 mm; Determining Operating Characteristics:22 mm; Case volume:7 mm; Displacement, geometric, per revolution:12.1 mm; Maximum Torque:11.5 mm; Drive Power:17.9 mm; Maximum angular acceleration:0.5 mm; Drive Speed:4.25 mm; Maximum rotational speed:0.3 mm; Maximum Volume Flow:0.15 mm; Torque:7.1 mm; Sequence Valve:10 mm; Pilot Pressure:10 mm; Pressurefree Operation:20 mm; Rotary stiffness:20.6 mm; Load Pressure:0.3 mm; Control Fluid Drain:0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
| PV020R1K1AYNMMZ+PVAC1E+P imported with original packaging Parker Piston pump PV020 series | Maximum Permissible Pilot Pressure:708 ACE/P4AH; Maximum Axial Force At Standstill:22x8x7; Determining Operating Characteristics:22; Power:8; Displacement, geometric, per revolution:7; Pressurefree Operation:8 mm; Weight (approx.):22 mm; Maximum Volume Flow:7 mm; Nominal Resistance:12.1 mm; Torque:11.5 mm; Sequence Valve:17.9 mm; Moment of inertia rotary group:0.5 mm; Maximum rotational speed:4.25 mm; Voltage:0.3 mm; Maximum angular acceleration:0.15 mm; Maximum Torque:7.1 mm; Control Pressure Measurement:10 mm; Load Pressure:10 mm; Pilot Pressure:20 mm; Control Fluid Drain:20.6 mm; Rotary stiffness:0.3 mm; Maximum Permissible Speed (limit Speed):0.15 mm; dn:13.3 mm; Basic dynamic load rating - C:2.3 kN; Basic static load rating - C0:0.765 kN; Fatigue load limit - Pu:0.032 kN; Limiting speed for grease lubrication:98000 r/min; Limiting speed for oil lubrication:150000 mm/min; Ball - Dw:3.969 mm; Ball - z:8; Gref:0.17 cm3; Calculation factor - e:0.68; Calculation factor - Y2:0.87; Calculation factor - Y0:0.38; Calculation factor - X2:0.41; Calculation factor - Y1:0.92; Calculation factor - Y2:1.41; Calculation factor - Y0:0.76; Calculation factor - X2:0.67; Preload class A - GA:20 N; Preload class B - GB:60 N; Preload class C - GC:120 N; Calculation factor - f:1.02; Calculation factor - f1:0.99; Calculation factor - f2A:1; Calculation factor - f2B:1.03; Calculation factor - f2C:1.06; Calculation factor - fHC:1; Preload class A:23 N/micron; Preload class B:34 N/micron; Preload class C:45 N/micron; d1:12.1 mm; d2:11.5 mm; D1:17.9 mm; C1:4.25 mm; r1,2 min.:0.3 mm; r3,4 min.:0.15 mm; da min.:10 mm; db min.:10 mm; Da max.:20 mm; Db max.:20.6 mm; ra max.:0.3 mm; rb max.:0.15 mm; dn:13.3 mm; Basic dynamic load rating C:2.29 kN; Basic static load rating C0:0.765 kN; Fatigue load limit Pu:0.032 kN; Attainable speed for grease lubrication:98000 r/min; Attainable speed for oil-air lubrication:150000 r/min; Ball diameter Dw:3.969 mm; Number of balls z:8; Reference grease quantity Gref:0.17 cm³; Preload class A GA:20 N; Static axial stiffness, preload class A:23 N/µm; Preload class B GB:60 N; Static axial stiffness, preload class B:34 N/µm; Preload class C GC:120 N; Static axial stiffness, preload class C:45 N/µm; Calculation factor f:1.02; Calculation factor f1:0.99; Calculation factor f2A:1; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor fHC:1; Calculation factor e:0.68; Calculation factor (single, tandem) Y2:0.87; Calculation factor (single, tandem) Y0:0.38; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor (back-to-back, face-to-face) Y2:1.41; Calculation factor (back-to-back, face-to-face) Y0:0.76; Calculation factor (back-to-back, face-to-face) X2:0.67; Mass bearing:0.012 kg; |
PV028R1K1T1NMMZ+PVAC2PCM imported with original packaging Parker Piston pump PV020 series Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Parker Piston pump PV020 series CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed PARKERS PV028R1K1T1NMMZ+PVAC2PCM Also Viewed
PV020L1E1T1NMFC imported with original packaging Parker Piston pump PV020 series
PV020L1K1JHNMR1+PV020L1L imported with original packaging Parker Piston pump PV020 series
PV020L1K1T1NELZ+PVAC2MCM imported with original packaging Parker Piston pump PV020 series
PV020R1D3BCNMRZ+PV020R1E imported with original packaging Parker Piston pump PV020 series
PV020R1E1BCNMFC+PV020R1E imported with original packaging Parker Piston pump PV020 series
All Groups