Home>Products>Parker Piston pump PV020 series> PV023R1D3T1NUPM imported with original packaging Parker Piston pump PV020 series
PV023R1D3T1NUPM imported with original packaging Parker Piston pump PV020 series
category
Parker Piston pump PV020 series
PARKERS PV023R1D3T1NUPM SPECIFICATIONS
- PARKERS
PV023R1D3T1NUPM
- Negotiation
- Negotiation
- Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- 0883450092548
- 14.00 in
- 7.480 in
- 4.54 in
- 7.000 in
- 7 in
- 1.50 in
- 1.125 in
- 3.17 in
- 3.09 in
- 5.450 in
- 0.06 in
- 3.14 in
- 237000 lb
- 194000 lb
- 0.25
- 2.67
- 3.98
- 650 rpm
- 1200 rpm
- 350 rpm
- 650 rpm
- 900 rpm
- 350 rpm
- 0.083 in
- 0.0050 in
- 0.0071
- 0.0091
- 0.160 mm
- 0.201 mm
PARKERS PV023R1D3T1NUPM Product Description
##Parts Table 1## PV023R1D3T1NUPM imported with original packaging Parker Piston pump PV020 series | ||||||||
---|---|---|---|---|---|---|---|---|
Oil Distribution Plate | 30 mm | 55 mm | 0,116 Kg | 13 mm | ||||
Drive Shaft | 150 mm | 190 mm | 1,1 Kg | KMR3 | ||||
Pump Right Rotating Group | 5.512 Inch | 140 Millimeter | 7.48 Inch | 190 Millimeter | 5.239 | 2.835 Inch | 72 Millimeter | ||||
Saddle Bearing | 1 mm | 14.961 Inch | 380 Millimeter | 26.7 | 5.239 | ||||
Press Pin | 1 Inch | 25.4 Millimeter | 190 | 0.966 | 26.7 | ||||
Barrel Washer | 8.661 Inch | 220 Millimeter | 13.386 Inch | 340 Millimeter | 18.82 | 2.205 Inch | 56 Millimeter | ||||
Oil Distribution Disc Plug | 0.1900 in | KMR3 | 0,116 Kg | http://www.timken.com | ||||
Ball Joint | 2.8750 in | 11.024 Inch | 280 Millimeter | 0.0 | 52.25 | ||||
Bushing Spring | 500 mm | 830 mm | 5931 | 325 mm | ||||
Seal Kits | 42 mm | 75 mm | 1169 lbs | 37 mm | ||||
Guide Ball | 64 kN | 31171507 | 2690 | Roller Assembly Plus Raceways |
PV020R1K1AYNMMZ+PVAC1E+P imported with original packaging Parker Piston pump PV020 series | Voltage:Mounted Bearing; Rotary stiffness:22228; Flow:5 in; Moment of inertia rotary group:Imperial; Maximum Torque:99999B; Rate Of Pressure Change:Single V-Lock; Pressurefree Operation:115 lb; Maximum Volume Flow:Round Flange; Drive Power:0883450092548; Maximum Axial Force At Standstill:14.00 in; Maximum Permissible Pilot Pressure:7.480 in; Case volume:4.54 in; Weight (approx.):7.000 in; Nominal Resistance:7 in; Drive Speed:1.50 in; Maximum rotational speed:1.125 in; Sequence Valve:3.17 in; Determining Operating Characteristics:3.09 in; Displacement, geometric, per revolution:5.450 in; Control Fluid Drain:0.06 in; Maximum angular acceleration:3.14 in; Power:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1K1AYNMMC+PGP511A0 imported with original packaging Parker Piston pump PV020 series | Displacement, geometric, per revolution:Mounted Bearing; Sequence Valve:22228; Maximum Torque:5 in; Torque:Imperial; Rate Of Pressure Change:99999B; Maximum angular acceleration:Single V-Lock; Power:115 lb; Case volume:Round Flange; Control Pressure Measurement:0883450092548; Load Pressure:14.00 in; Flow:7.480 in; Nominal Resistance:4.54 in; Moment of inertia rotary group:7.000 in; Maximum Axial Force At Standstill:7 in; Drive Power:1.50 in; Maximum Permissible Speed (limit Speed):1.125 in; Maximum Volume Flow:3.17 in; Weight (approx.):3.09 in; Determining Operating Characteristics:5.450 in; Pressurefree Operation:0.06 in; Maximum Permissible Pilot Pressure:3.14 in; Drive Speed:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1K1AYNMMW+PGP511A0 imported with original packaging Parker Piston pump PV020 series | Weight (approx.):Mounted Bearing; Pressurefree Operation:22228; Drive Power:5 in; Torque:Imperial; Rate Of Pressure Change:99999B; Maximum angular acceleration:Single V-Lock; Rotary stiffness:115 lb; Maximum Volume Flow:Round Flange; Maximum Torque:0883450092548; Pilot Pressure:14.00 in; Drive Speed:7.480 in; Voltage:4.54 in; Determining Operating Characteristics:7.000 in; Maximum Permissible Pilot Pressure:7 in; Flow:1.50 in; Displacement, geometric, per revolution:1.125 in; Maximum Axial Force At Standstill:3.17 in; Load Pressure:3.09 in; Case volume:5.450 in; Power:0.06 in; Moment of inertia rotary group:3.14 in; Maximum rotational speed:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020L1E1T1NMFC imported with original packaging Parker Piston pump PV020 series | Maximum Torque:Mounted Bearing; Weight (approx.):22228; Maximum angular acceleration:5 in; Voltage:Imperial; Control Pressure Measurement:99999B; Maximum rotational speed:Single V-Lock; Displacement, geometric, per revolution:115 lb; Rate Of Pressure Change:Round Flange; Drive Speed:0883450092548; Sequence Valve:14.00 in; Torque:7.480 in; Maximum Permissible Pilot Pressure:4.54 in; Load Pressure:7.000 in; Case volume:7 in; Moment of inertia rotary group:1.50 in; Pressurefree Operation:1.125 in; Pilot Pressure:3.17 in; Flow:3.09 in; Power:5.450 in; Determining Operating Characteristics:0.06 in; Maximum Axial Force At Standstill:3.14 in; Maximum Permissible Speed (limit Speed):237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020L1K1T1NELZ+PVAC2MCM imported with original packaging Parker Piston pump PV020 series | Sequence Valve:Mounted Bearing; Displacement, geometric, per revolution:22228; Rate Of Pressure Change:5 in; Voltage:Imperial; Drive Power:99999B; Rotary stiffness:Single V-Lock; Maximum Permissible Pilot Pressure:115 lb; Power:Round Flange; Flow:0883450092548; Pilot Pressure:14.00 in; Control Pressure Measurement:7.480 in; Nominal Resistance:4.54 in; Maximum Volume Flow:7.000 in; Case volume:7 in; Torque:1.50 in; Maximum Axial Force At Standstill:1.125 in; Drive Speed:3.17 in; Determining Operating Characteristics:3.09 in; Moment of inertia rotary group:5.450 in; Load Pressure:0.06 in; Maximum angular acceleration:3.14 in; Maximum rotational speed:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1K1AYNMMC4545+PGP5 imported with original packaging Parker Piston pump PV020 series | Maximum Permissible Pilot Pressure:Mounted Bearing; Maximum Permissible Speed (limit Speed):22228; Maximum angular acceleration:5 in; Determining Operating Characteristics:Imperial; Displacement, geometric, per revolution:99999B; Drive Power:Single V-Lock; Rotary stiffness:115 lb; Control Fluid Drain:Round Flange; Drive Speed:0883450092548; Sequence Valve:14.00 in; Case volume:7.480 in; Maximum Axial Force At Standstill:4.54 in; Nominal Resistance:7.000 in; Power:7 in; Rate Of Pressure Change:1.50 in; Torque:1.125 in; Maximum Torque:3.17 in; Load Pressure:3.09 in; Pressurefree Operation:5.450 in; Maximum rotational speed:0.06 in; Voltage:3.14 in; Moment of inertia rotary group:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1E1BCNMFC+PV020R1E imported with original packaging Parker Piston pump PV020 series | Moment of inertia rotary group:Mounted Bearing; Load Pressure:22228; Case volume:5 in; Maximum Permissible Speed (limit Speed):Imperial; Maximum Permissible Pilot Pressure:99999B; Maximum angular acceleration:Single V-Lock; Maximum rotational speed:115 lb; Power:Round Flange; Rate Of Pressure Change:0883450092548; Flow:14.00 in; Control Fluid Drain:7.480 in; Sequence Valve:4.54 in; Nominal Resistance:7.000 in; Torque:7 in; Determining Operating Characteristics:1.50 in; Drive Speed:1.125 in; Maximum Axial Force At Standstill:3.17 in; Control Pressure Measurement:3.09 in; Pressurefree Operation:5.450 in; Pilot Pressure:0.06 in; Voltage:3.14 in; Weight (approx.):237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020L1K1JHNMR1+PV020L1L imported with original packaging Parker Piston pump PV020 series | Pressurefree Operation:Mounted Bearing; Drive Speed:22228; Case volume:5 in; Rate Of Pressure Change:Imperial; Sequence Valve:99999B; Maximum Torque:Single V-Lock; Control Pressure Measurement:115 lb; Drive Power:Round Flange; Maximum Volume Flow:0883450092548; Maximum Axial Force At Standstill:14.00 in; Moment of inertia rotary group:7.480 in; Displacement, geometric, per revolution:4.54 in; Pilot Pressure:7.000 in; Maximum rotational speed:7 in; Nominal Resistance:1.50 in; Rotary stiffness:1.125 in; Flow:3.17 in; Load Pressure:3.09 in; Maximum angular acceleration:5.450 in; Maximum Permissible Pilot Pressure:0.06 in; Torque:3.14 in; Power:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1K1AYNMMC+PGP505A0 imported with original packaging Parker Piston pump PV020 series | Maximum Volume Flow:Mounted Bearing; Sequence Valve:22228; Maximum angular acceleration:5 in; Power:Imperial; Pilot Pressure:99999B; Maximum Axial Force At Standstill:Single V-Lock; Determining Operating Characteristics:115 lb; Pressurefree Operation:Round Flange; Control Pressure Measurement:0883450092548; Flow:14.00 in; Rate Of Pressure Change:7.480 in; Displacement, geometric, per revolution:4.54 in; Drive Speed:7.000 in; Case volume:7 in; Maximum Permissible Speed (limit Speed):1.50 in; Load Pressure:1.125 in; Drive Power:3.17 in; Nominal Resistance:3.09 in; Moment of inertia rotary group:5.450 in; Weight (approx.):0.06 in; Maximum Permissible Pilot Pressure:3.14 in; Maximum Torque:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV020R1D3BCNMRZ+PV020R1E imported with original packaging Parker Piston pump PV020 series | Torque:Mounted Bearing; Displacement, geometric, per revolution:22228; Maximum angular acceleration:5 in; Control Fluid Drain:Imperial; Control Pressure Measurement:99999B; Rotary stiffness:Single V-Lock; Drive Power:115 lb; Maximum Permissible Pilot Pressure:Round Flange; Maximum Permissible Speed (limit Speed):0883450092548; Maximum Torque:14.00 in; Pressurefree Operation:7.480 in; Weight (approx.):4.54 in; Pilot Pressure:7.000 in; Determining Operating Characteristics:7 in; Voltage:1.50 in; Maximum Volume Flow:1.125 in; Rate Of Pressure Change:3.17 in; Nominal Resistance:3.09 in; Power:5.450 in; Maximum rotational speed:0.06 in; Sequence Valve:3.14 in; Drive Speed:237000 lb; C - Dynamic Load (Basic):194000 lb; e - Geometry Factor:0.25; Y1 - Geometry Factor:2.67; Y2 - Geometry Factor:3.98; Oil Lubrication - M/N Seal:650 rpm; Oil Lubrication - T Seal:1200 rpm; Oil Lubrication - B/C/O Seal:350 rpm; Grease Lubrication - M/N Seal:650 rpm; Grease Lubrication - T Seal:900 rpm; Grease Lubrication - B/C/O Seal:350 rpm; Float:0.083 in; Shaft Tolerance:0.0050 in; Eng Internal Radial Clearance - Min:0.0071; Eng Internal Radial Clearance - Max:0.0091; Pre Install Clearance Min:0.160 mm; Pre Install Clearance Max:0.201 mm; |
PV023R1D3T1NUPM imported with original packaging Parker Piston pump PV020 series Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Parker Piston pump PV020 series CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed PARKERS PV023R1D3T1NUPM Also Viewed
- PV020L1E1T1NMFC imported with original packaging Parker Piston pump PV020 series
- PV020L1K1JHNMR1+PV020L1L imported with original packaging Parker Piston pump PV020 series
- PV020L1K1T1NELZ+PVAC2MCM imported with original packaging Parker Piston pump PV020 series
- PV020R1D3BCNMRZ+PV020R1E imported with original packaging Parker Piston pump PV020 series
- PV020R1E1BCNMFC+PV020R1E imported with original packaging Parker Piston pump PV020 series
All Groups