Home>Products>Vickers Vane pumps>4535V42A38-1CA22R Vickers Gear pumps imported with original packaging
4535V42A38-1CA22R Vickers Gear pumps imported with original packaging
category
Vickers Vane pumps
Vickers 4535V42A38-1CA22R SPECIFICATIONS
- Vickers
4535V42A38-1CA22R
- Negotiation
- Negotiation
- Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- Ball Bearing
- Yes
- No
- Steel
- Contact Seal
- C3-Loose
- Metric
- 28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cage;
- Deep Groove | With Snap Ring
- Single Row Ball Bearing
- 31171504
- 8482.10.50.68
- Bearing
- Ball
- 0.3814
- 0.63 Inch | 16 Millimeter
- 1.102 Inch | 28 Millimeter
- 0 Inch | 0 Millimeter
- 2.283 Inch | 58 Millimeter
Vickers 4535V42A38-1CA22R Product Description
##Parts Table 1##4535V42A38-1CA22R Vickers Gear pumps imported with original packaging | ||||||||
---|---|---|---|---|---|---|---|---|
Friction Plate | 360 mm | 260 mm | 60 mm | 18,4 Kg | ||||
Cylinder Blocks | 0.866 Inch | 22 Millimeter | 0.63 Inch | 16 Millimeter | 40 mm | - | ||||
Ball Guides | Adapter Sleeve | Adapter Sleeve | Single Row | Angular Contact | High Capacity Basic Design | 1.044 | ||||
Swing | 2.677 Inch | 68 Millimeter | 1.772 Inch | 45 Millimeter | 0.945 Inch | 24 Millimeter | - | ||||
Valve Plates | Metric | 602159 | Phenolic | 290 | ||||
Back Plate | 143.5 mm | 40 mm | 97.5 mm | 1.772 Inch | 45 Millimeter | ||||
Spacer | 215 | 100 | 73 | Uncoated | ||||
Block Springs | 160mm | 105mm | 26mm | 360 mm | ||||
Coil Spring | 40 mm | 17 mm | 12 mm | http://www.skf.com | ||||
Inclined Plate | UL, AFBMA, AGMA, ASMMA, BSA, CMA, MPTA, PTDA | 208 | 2799.3 | Steel |
4535V45A30-1BA22R Vickers Gear pumps imported with original packaging | Determining Operating Characteristics:Single Row Ball Bearings; Torque:0.0; Control Pressure Measurement:KOYO; Pilot Pressure:N/A; Rate Of Pressure Change:0; Power:B00308; Load Pressure:2 Seals; Maximum Permissible Speed (limit Speed):ABEC 1 | ISO P0; Maximum Volume Flow:No; Sequence Valve:Ball Bearing; Control Fluid Drain:Yes; Displacement, geometric, per revolution:No; Maximum Torque:Steel; Weight (approx.):Contact Seal; Maximum angular acceleration:C3-Loose; Rotary stiffness:Metric; Nominal Resistance:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Case volume:Deep Groove | With Snap Ring; Pressurefree Operation:Single Row Ball Bearing; Maximum Permissible Pilot Pressure:31171504; Flow:8482.10.50.68; Moment of inertia rotary group:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V50A30-1CA22R Vickers Gear pumps imported with original packaging | Maximum angular acceleration:Single Row Ball Bearings; Control Pressure Measurement:0.0; Maximum Permissible Pilot Pressure:KOYO; Load Pressure:N/A; Maximum Torque:0; Rotary stiffness:B00308; Control Fluid Drain:2 Seals; Power:ABEC 1 | ISO P0; Rate Of Pressure Change:No; Weight (approx.):Ball Bearing; Sequence Valve:Yes; Pilot Pressure:No; Drive Speed:Steel; Torque:Contact Seal; Drive Power:C3-Loose; Voltage:Metric; Pressurefree Operation:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Maximum Permissible Speed (limit Speed):Deep Groove | With Snap Ring; Case volume:Single Row Ball Bearing; Nominal Resistance:31171504; Moment of inertia rotary group:8482.10.50.68; Maximum Volume Flow:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V45A38-1DA22R Vickers Gear pumps imported with original packaging | Pressurefree Operation:Single Row Ball Bearings; Rotary stiffness:0.0; Control Fluid Drain:KOYO; Nominal Resistance:N/A; Flow:0; Maximum rotational speed:B00308; Power:2 Seals; Drive Speed:ABEC 1 | ISO P0; Displacement, geometric, per revolution:No; Maximum angular acceleration:Ball Bearing; Pilot Pressure:Yes; Weight (approx.):No; Voltage:Steel; Control Pressure Measurement:Contact Seal; Sequence Valve:C3-Loose; Moment of inertia rotary group:Metric; Rate Of Pressure Change:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Maximum Permissible Pilot Pressure:Deep Groove | With Snap Ring; Torque:Single Row Ball Bearing; Determining Operating Characteristics:31171504; Load Pressure:8482.10.50.68; Maximum Permissible Speed (limit Speed):Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V45A38-1CA22R Vickers Gear pumps imported with original packaging | Power:Single Row Ball Bearings; Maximum angular acceleration:0.0; Moment of inertia rotary group:KOYO; Case volume:N/A; Drive Speed:0; Torque:B00308; Control Pressure Measurement:2 Seals; Rate Of Pressure Change:ABEC 1 | ISO P0; Nominal Resistance:No; Maximum Axial Force At Standstill:Ball Bearing; Drive Power:Yes; Maximum Permissible Pilot Pressure:No; Displacement, geometric, per revolution:Steel; Voltage:Contact Seal; Pressurefree Operation:C3-Loose; Maximum Volume Flow:Metric; Weight (approx.):28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Load Pressure:Deep Groove | With Snap Ring; Maximum rotational speed:Single Row Ball Bearing; Determining Operating Characteristics:31171504; Flow:8482.10.50.68; Rotary stiffness:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V45A30-1DA22R Vickers Gear pumps imported with original packaging | Flow:Single Row Ball Bearings; Voltage:0.0; Moment of inertia rotary group:KOYO; Rate Of Pressure Change:N/A; Pilot Pressure:0; Maximum Permissible Speed (limit Speed):B00308; Maximum Torque:2 Seals; Determining Operating Characteristics:ABEC 1 | ISO P0; Maximum Axial Force At Standstill:No; Torque:Ball Bearing; Case volume:Yes; Sequence Valve:No; Load Pressure:Steel; Control Fluid Drain:Contact Seal; Maximum angular acceleration:C3-Loose; Weight (approx.):Metric; Drive Power:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Maximum Volume Flow:Deep Groove | With Snap Ring; Drive Speed:Single Row Ball Bearing; Control Pressure Measurement:31171504; Rotary stiffness:8482.10.50.68; Maximum rotational speed:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V50A38-1CA22R Vickers Gear pumps imported with original packaging | Maximum Volume Flow:Single Row Ball Bearings; Control Pressure Measurement:0.0; Sequence Valve:KOYO; Nominal Resistance:N/A; Drive Power:0; Pilot Pressure:B00308; Voltage:2 Seals; Maximum Permissible Pilot Pressure:ABEC 1 | ISO P0; Maximum rotational speed:No; Maximum angular acceleration:Ball Bearing; Moment of inertia rotary group:Yes; Load Pressure:No; Weight (approx.):Steel; Rate Of Pressure Change:Contact Seal; Drive Speed:C3-Loose; Maximum Permissible Speed (limit Speed):Metric; Case volume:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Pressurefree Operation:Deep Groove | With Snap Ring; Rotary stiffness:Single Row Ball Bearing; Determining Operating Characteristics:31171504; Control Fluid Drain:8482.10.50.68; Maximum Torque:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V50A25-1CA22R Vickers Gear pumps imported with original packaging | Maximum angular acceleration:Single Row Ball Bearings; Weight (approx.):0.0; Pilot Pressure:KOYO; Power:N/A; Determining Operating Characteristics:0; Displacement, geometric, per revolution:B00308; Maximum Permissible Pilot Pressure:2 Seals; Voltage:ABEC 1 | ISO P0; Flow:No; Pressurefree Operation:Ball Bearing; Nominal Resistance:Yes; Control Fluid Drain:No; Maximum Permissible Speed (limit Speed):Steel; Drive Power:Contact Seal; Control Pressure Measurement:C3-Loose; Sequence Valve:Metric; Maximum Volume Flow:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Rate Of Pressure Change:Deep Groove | With Snap Ring; Maximum Torque:Single Row Ball Bearing; Case volume:31171504; Load Pressure:8482.10.50.68; Moment of inertia rotary group:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V45A35-1DA22R Vickers Gear pumps imported with original packaging | Load Pressure:Single Row Ball Bearings; Weight (approx.):0.0; Flow:KOYO; Maximum Torque:N/A; Power:0; Moment of inertia rotary group:B00308; Maximum Permissible Pilot Pressure:2 Seals; Voltage:ABEC 1 | ISO P0; Maximum Volume Flow:No; Torque:Ball Bearing; Maximum angular acceleration:Yes; Sequence Valve:No; Determining Operating Characteristics:Steel; Pressurefree Operation:Contact Seal; Case volume:C3-Loose; Maximum Permissible Speed (limit Speed):Metric; Rotary stiffness:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Displacement, geometric, per revolution:Deep Groove | With Snap Ring; Drive Speed:Single Row Ball Bearing; Maximum rotational speed:31171504; Nominal Resistance:8482.10.50.68; Control Pressure Measurement:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V50A35-1CA22R Vickers Gear pumps imported with original packaging | Maximum Permissible Speed (limit Speed):Single Row Ball Bearings; Maximum Permissible Pilot Pressure:0.0; Pilot Pressure:KOYO; Determining Operating Characteristics:N/A; Maximum Volume Flow:0; Rate Of Pressure Change:B00308; Weight (approx.):2 Seals; Moment of inertia rotary group:ABEC 1 | ISO P0; Sequence Valve:No; Control Fluid Drain:Ball Bearing; Rotary stiffness:Yes; Displacement, geometric, per revolution:No; Maximum angular acceleration:Steel; Pressurefree Operation:Contact Seal; Load Pressure:C3-Loose; Power:Metric; Drive Power:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Torque:Deep Groove | With Snap Ring; Control Pressure Measurement:Single Row Ball Bearing; Maximum rotational speed:31171504; Nominal Resistance:8482.10.50.68; Maximum Torque:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging | Power:Single Row Ball Bearings; Displacement, geometric, per revolution:0.0; Case volume:KOYO; Nominal Resistance:N/A; Maximum Permissible Speed (limit Speed):0; Flow:B00308; Control Pressure Measurement:2 Seals; Pilot Pressure:ABEC 1 | ISO P0; Sequence Valve:No; Pressurefree Operation:Ball Bearing; Torque:Yes; Determining Operating Characteristics:No; Rotary stiffness:Steel; Maximum Axial Force At Standstill:Contact Seal; Maximum Torque:C3-Loose; Maximum Volume Flow:Metric; Control Fluid Drain:28MM Bore; 58MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; Yes; Maximum rotational speed:Deep Groove | With Snap Ring; Maximum Permissible Pilot Pressure:Single Row Ball Bearing; Maximum angular acceleration:31171504; Voltage:8482.10.50.68; Rate Of Pressure Change:Bearing; Keyword String:Ball; Weight / LBS:0.3814; Outer Race Width:0.63 Inch | 16 Millimeter; d:1.102 Inch | 28 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; D:2.283 Inch | 58 Millimeter; |
4535V42A38-1CA22R Vickers Gear pumps imported with original packaging Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Vickers Vane pumps CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed Vickers 4535V42A38-1CA22R Also Viewed
- 22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging
- 4535V45A30-1BA22R Vickers Gear pumps imported with original packaging
- 4535V50A38-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A35-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A30-1CA22R Vickers Gear pumps imported with original packaging
All Groups