Home>Products>Vickers Vane pumps>V10-1P7P-38C Vickers Gear pumps imported with original packaging
V10-1P7P-38C Vickers Gear pumps imported with original packaging
category
Vickers Vane pumps
Vickers V10-1P7P-38C SPECIFICATIONS
- Vickers
V10-1P7P-38C
- Negotiation
- Negotiation
- Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- 11 mm
- 50 mm
- 48,3 mm
- 44,5 mm
- 212 mm
- 166 mm
- 337 mm
- 127 mm
- 19 mm
- 12 mm
- 6 mm
- 60,1 mm
- 6,3 Kg
- 19,5 kN
- 12 mm
- 36.4 mm
- 18.2 mm
- 44.1 mm
- M6x1
- 89 mm
- 56 mm
- 70 mm
- 57 mm
- 16 mm
- 37 mm
- 34.1 mm
- 18.2 mm
- 19.5 kN
- 11.2 kN
- -20 °C
- 100 °C
- 11.5 Nm
- T206-
- EX206G2
Vickers V10-1P7P-38C Product Description
##Parts Table 1##V10-1P7P-38C Vickers Gear pumps imported with original packaging | ||||||||
---|---|---|---|---|---|---|---|---|
Cylinder Blocks | 50 mm | 20 mm | 90 mm | Available | ||||
Set Plate | 4016.93.50.20 | DD (Contact Rubber Seal) | 17 | 38 mm | ||||
Skeleton Oil Seal | Available | 7 Days | 187,325 mm | 37.1 kN | ||||
Socket Bolt | [Aluminum Alloy] 2017 Aluminum Alloy | Set Screw | ZZ (Double Shield) | 406,4 | ||||
Spindle | 12 mm | 100 mm | 0.033 | http://www.skf.com | ||||
Variable Piston | 130 mm | 172.65 mm | 300.02 mm | ABEC 1 | ISO P0 | ||||
Snap Ring | [Steel] Steel | 3,3 mm | Round | Bearings with Housings | ||||
Swash Plate Assy | 37.1 kN | Available | 406,4 | Bearings with Housings | ||||
Rotor | 20.000 mm | 14.00 mm | 47.0000 mm | 40 mm | ||||
Seal Kit For Hyd Pump | 87,3125 mm | 96 mm | 1.781 Inch / 45.237 Millimeter | 154,8 mm | ||||
Separator | 40 mm | 22 mm | 65 mm | Open | ||||
Set Plate | 406,4 mm | 193,675 mm | 590,55 mm | 76 | ||||
Block Springs | 71,5 kN | 100 mm | 171.6 mm | 1-25/32 Shaft Dia |
4535V50A25-1CA22R Vickers Gear pumps imported with original packaging | Weight (approx.):EXT206+WB; Moment of inertia rotary group:30; Load Pressure:30 mm; Control Pressure Measurement:396 mm; Power:150 mm; Drive Speed:30 mm; Maximum Axial Force At Standstill:95 mm; Control Fluid Drain:18,2 mm; Rotary stiffness:11 mm; Sequence Valve:50 mm; Voltage:48,3 mm; Maximum Permissible Speed (limit Speed):44,5 mm; Pilot Pressure:212 mm; Drive Power:166 mm; Maximum rotational speed:337 mm; Maximum Torque:127 mm; Nominal Resistance:19 mm; Pressurefree Operation:12 mm; Displacement, geometric, per revolution:6 mm; Maximum Volume Flow:60,1 mm; Maximum angular acceleration:6,3 Kg; Case volume:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V50A30-1CA22R Vickers Gear pumps imported with original packaging | Pilot Pressure:EXT206+WB; Case volume:30; Maximum Axial Force At Standstill:30 mm; Displacement, geometric, per revolution:396 mm; Drive Speed:150 mm; Control Fluid Drain:30 mm; Pressurefree Operation:95 mm; Voltage:18,2 mm; Maximum Permissible Pilot Pressure:11 mm; Moment of inertia rotary group:50 mm; Power:48,3 mm; Sequence Valve:44,5 mm; Drive Power:212 mm; Control Pressure Measurement:166 mm; Weight (approx.):337 mm; Load Pressure:127 mm; Nominal Resistance:19 mm; Maximum Torque:12 mm; Determining Operating Characteristics:6 mm; Maximum rotational speed:60,1 mm; Maximum Permissible Speed (limit Speed):6,3 Kg; Maximum angular acceleration:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V45A38-1DA22R Vickers Gear pumps imported with original packaging | Case volume:EXT206+WB; Displacement, geometric, per revolution:30; Drive Power:30 mm; Rate Of Pressure Change:396 mm; Nominal Resistance:150 mm; Load Pressure:30 mm; Maximum Permissible Speed (limit Speed):95 mm; Maximum rotational speed:18,2 mm; Weight (approx.):11 mm; Maximum Permissible Pilot Pressure:50 mm; Pressurefree Operation:48,3 mm; Flow:44,5 mm; Determining Operating Characteristics:212 mm; Moment of inertia rotary group:166 mm; Pilot Pressure:337 mm; Maximum Axial Force At Standstill:127 mm; Voltage:19 mm; Control Fluid Drain:12 mm; Maximum Volume Flow:6 mm; Control Pressure Measurement:60,1 mm; Maximum Torque:6,3 Kg; Rotary stiffness:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V45A35-1DA22R Vickers Gear pumps imported with original packaging | Control Pressure Measurement:EXT206+WB; Case volume:30; Moment of inertia rotary group:30 mm; Drive Power:396 mm; Pilot Pressure:150 mm; Power:30 mm; Weight (approx.):95 mm; Maximum angular acceleration:18,2 mm; Rate Of Pressure Change:11 mm; Pressurefree Operation:50 mm; Maximum Permissible Speed (limit Speed):48,3 mm; Maximum Permissible Pilot Pressure:44,5 mm; Load Pressure:212 mm; Maximum rotational speed:166 mm; Maximum Volume Flow:337 mm; Maximum Axial Force At Standstill:127 mm; Determining Operating Characteristics:19 mm; Flow:12 mm; Maximum Torque:6 mm; Drive Speed:60,1 mm; Control Fluid Drain:6,3 Kg; Torque:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging | Maximum rotational speed:EXT206+WB; Displacement, geometric, per revolution:30; Control Fluid Drain:30 mm; Load Pressure:396 mm; Moment of inertia rotary group:150 mm; Maximum Permissible Pilot Pressure:30 mm; Weight (approx.):95 mm; Maximum Volume Flow:18,2 mm; Maximum Permissible Speed (limit Speed):11 mm; Voltage:50 mm; Case volume:48,3 mm; Rate Of Pressure Change:44,5 mm; Control Pressure Measurement:212 mm; Rotary stiffness:166 mm; Power:337 mm; Determining Operating Characteristics:127 mm; Pressurefree Operation:19 mm; Nominal Resistance:12 mm; Maximum Axial Force At Standstill:6 mm; Maximum Torque:60,1 mm; Drive Speed:6,3 Kg; Sequence Valve:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V45A30-1BA22R Vickers Gear pumps imported with original packaging | Maximum Axial Force At Standstill:EXT206+WB; Flow:30; Pressurefree Operation:30 mm; Drive Speed:396 mm; Rate Of Pressure Change:150 mm; Sequence Valve:30 mm; Maximum rotational speed:95 mm; Moment of inertia rotary group:18,2 mm; Weight (approx.):11 mm; Torque:50 mm; Voltage:48,3 mm; Pilot Pressure:44,5 mm; Power:212 mm; Maximum Torque:166 mm; Determining Operating Characteristics:337 mm; Rotary stiffness:127 mm; Drive Power:19 mm; Maximum Volume Flow:12 mm; Maximum angular acceleration:6 mm; Case volume:60,1 mm; Control Pressure Measurement:6,3 Kg; Nominal Resistance:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V45A30-1DA22R Vickers Gear pumps imported with original packaging | Power:EXT206+WB; Determining Operating Characteristics:30; Torque:30 mm; Drive Speed:396 mm; Maximum Axial Force At Standstill:150 mm; Pilot Pressure:30 mm; Sequence Valve:95 mm; Pressurefree Operation:18,2 mm; Rate Of Pressure Change:11 mm; Moment of inertia rotary group:50 mm; Control Fluid Drain:48,3 mm; Maximum Permissible Pilot Pressure:44,5 mm; Control Pressure Measurement:212 mm; Maximum Permissible Speed (limit Speed):166 mm; Rotary stiffness:337 mm; Load Pressure:127 mm; Maximum Volume Flow:19 mm; Maximum Torque:12 mm; Drive Power:6 mm; Weight (approx.):60,1 mm; Case volume:6,3 Kg; Nominal Resistance:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V50A35-1CA22R Vickers Gear pumps imported with original packaging | Torque:EXT206+WB; Rotary stiffness:30; Voltage:30 mm; Flow:396 mm; Control Fluid Drain:150 mm; Drive Power:30 mm; Case volume:95 mm; Maximum Volume Flow:18,2 mm; Displacement, geometric, per revolution:11 mm; Maximum Axial Force At Standstill:50 mm; Maximum Permissible Pilot Pressure:48,3 mm; Maximum angular acceleration:44,5 mm; Moment of inertia rotary group:212 mm; Determining Operating Characteristics:166 mm; Power:337 mm; Pilot Pressure:127 mm; Control Pressure Measurement:19 mm; Nominal Resistance:12 mm; Pressurefree Operation:6 mm; Maximum Torque:60,1 mm; Drive Speed:6,3 Kg; Maximum rotational speed:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V45A38-1CA22R Vickers Gear pumps imported with original packaging | Torque:EXT206+WB; Nominal Resistance:30; Drive Speed:30 mm; Pressurefree Operation:396 mm; Maximum Permissible Pilot Pressure:150 mm; Rate Of Pressure Change:30 mm; Maximum Torque:95 mm; Load Pressure:18,2 mm; Displacement, geometric, per revolution:11 mm; Maximum Permissible Speed (limit Speed):50 mm; Maximum angular acceleration:48,3 mm; Determining Operating Characteristics:44,5 mm; Voltage:212 mm; Control Fluid Drain:166 mm; Control Pressure Measurement:337 mm; Pilot Pressure:127 mm; Power:19 mm; Case volume:12 mm; Sequence Valve:6 mm; Weight (approx.):60,1 mm; Maximum Volume Flow:6,3 Kg; Rotary stiffness:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
4535V50A38-1CA22R Vickers Gear pumps imported with original packaging | Rate Of Pressure Change:EXT206+WB; Weight (approx.):30; Moment of inertia rotary group:30 mm; Pressurefree Operation:396 mm; Rotary stiffness:150 mm; Control Pressure Measurement:30 mm; Load Pressure:95 mm; Maximum Axial Force At Standstill:18,2 mm; Displacement, geometric, per revolution:11 mm; Maximum Volume Flow:50 mm; Case volume:48,3 mm; Drive Power:44,5 mm; Power:212 mm; Drive Speed:166 mm; Maximum Permissible Pilot Pressure:337 mm; Flow:127 mm; Nominal Resistance:19 mm; Determining Operating Characteristics:12 mm; Sequence Valve:6 mm; Pilot Pressure:60,1 mm; Maximum angular acceleration:6,3 Kg; Maximum rotational speed:19,5 kN; A1:12 mm; B:36.4 mm; A5:18.2 mm; d1:44.1 mm; G:M6x1; H1:89 mm; H2:56 mm; L1:70 mm; L3:57 mm; N1:16 mm; N2:37 mm; s1:34.1 mm; S:18.2 mm; C:19.5 kN; C0:11.2 kN; T min.:-20 °C; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; Designation of housing:T206-; Designation of bearing:EX206G2; |
V10-1P7P-38C Vickers Gear pumps imported with original packaging Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Vickers Vane pumps CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed Vickers V10-1P7P-38C Also Viewed
- 22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging
- 4535V45A30-1BA22R Vickers Gear pumps imported with original packaging
- 4535V50A38-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A35-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A30-1CA22R Vickers Gear pumps imported with original packaging
All Groups