Home>Products>Vickers Vane pumps>20V-4A-1C-22R Vickers Gear pumps imported with original packaging
20V-4A-1C-22R Vickers Gear pumps imported with original packaging
category
Vickers Vane pumps
Vickers 20V-4A-1C-22R SPECIFICATIONS
- Vickers
20V-4A-1C-22R
- Negotiation
- Negotiation
- Sydffk Pump Inc.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
- Spherical Roller
- Clearance/Non-Contact
- Round
- 46800 lb
- Solid Pillow Block
- 55700 lb
- 3.2500 in
- 2800 RPM
- Cast Iron
- Lubrication Fitting
- Double Concentric Collar
- 5000
- 8-1/8 in
- ANSI/ABMA STD 9-1990
Vickers 20V-4A-1C-22R Product Description
##Parts Table 1##20V-4A-1C-22R Vickers Gear pumps imported with original packaging | ||||||||
---|---|---|---|---|---|---|---|---|
Oil Distribution Disc Plug | 23,8125 mm | 52 mm | 15,8 kN | 34,92 mm | ||||
Skeleton Oil Seal | 33,338 mm | 0.15 | 64,2 kN | 23,812 mm | ||||
Shafts | 15 mm | 42 mm | 11,4 kN | 13 mm | ||||
Coil Spring | 4.528 Inch | 115 Millimeter | 7.02 Inch | 178.3 Millimeter | Double Row | Double Nut | 70 | ||||
Set Plate | 0.375 Inch | 9.525 Millimeter | -65 to +250 °F | 0.06 in | 156 | ||||
Piston Shoe | 0.669 Inch | 17 Millimeter | 1.85 Inch | 47 Millimeter | http://www.timken.com | 0.874 Inch | 22.2 Millimeter | ||||
Guide Ball | 3.281 Inch | 83.337 Millimeter | 4.938 Inch | 125.425 Millimeter | 15 mm | N/A | ||||
Push Rod | 6.0000 in | 7.0000 in | Expansion | 0.5000 in | ||||
Spindle | 70 | 3,5 mm | 156 | 27689-906A3 | ||||
Rod | 1 Single Cone | 1 Single Cup | Flanged Outer Race | 4 Shaft Dia | Spherical Roller Bearing | 24.97 | ||||
Set Plate | 55 mm | 55.6 | 7.02 Inch | 178.3 Millimeter | 55.6 mm | ||||
Spacer | 50,8 mm | 111,125 mm | 32,545 mm | 29,317 mm | ||||
Seal Kits | 65 mm | 3,3 mm | 108 | Plain Spherical Rod End | ||||
Swash Plate Assy | 23,812 mm | 4500 | 1,290.00 | 1150 mm |
4535V45A30-1BA22R Vickers Gear pumps imported with original packaging | Voltage:2.9375 in; Pressurefree Operation:3-3/16 in; Case volume:10.4375 in; Control Pressure Measurement:Non-Expansion Bearing (Fixed); Moment of inertia rotary group:6.4375 in; Power:Powder Coated; Load Pressure:Two-Bolt Base; Control Fluid Drain:4-7/8 in; Maximum angular acceleration:Spherical Roller; Drive Power:Clearance/Non-Contact; Maximum Torque:Round; Sequence Valve:46800 lb; Weight (approx.):Solid Pillow Block; Torque:55700 lb; Rotary stiffness:3.2500 in; Pilot Pressure:2800 RPM; Maximum rotational speed:Cast Iron; Nominal Resistance:Lubrication Fitting; Displacement, geometric, per revolution:Double Concentric Collar; Maximum Permissible Speed (limit Speed):5000; Maximum Axial Force At Standstill:8-1/8 in; Drive Speed:ANSI/ABMA STD 9-1990; |
4535V45A38-1CA22R Vickers Gear pumps imported with original packaging | Pilot Pressure:2.9375 in; Case volume:3-3/16 in; Pressurefree Operation:10.4375 in; Nominal Resistance:Non-Expansion Bearing (Fixed); Control Fluid Drain:6.4375 in; Weight (approx.):Powder Coated; Moment of inertia rotary group:Two-Bolt Base; Maximum Volume Flow:4-7/8 in; Drive Power:Spherical Roller; Rate Of Pressure Change:Clearance/Non-Contact; Sequence Valve:Round; Voltage:46800 lb; Maximum Permissible Speed (limit Speed):Solid Pillow Block; Maximum angular acceleration:55700 lb; Rotary stiffness:3.2500 in; Load Pressure:2800 RPM; Maximum Permissible Pilot Pressure:Cast Iron; Maximum Axial Force At Standstill:Lubrication Fitting; Torque:Double Concentric Collar; Flow:5000; Control Pressure Measurement:8-1/8 in; Power:ANSI/ABMA STD 9-1990; |
4535V45A30-1DA22R Vickers Gear pumps imported with original packaging | Maximum Permissible Speed (limit Speed):2.9375 in; Voltage:3-3/16 in; Flow:10.4375 in; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Case volume:6.4375 in; Torque:Powder Coated; Weight (approx.):Two-Bolt Base; Maximum Torque:4-7/8 in; Displacement, geometric, per revolution:Spherical Roller; Maximum Axial Force At Standstill:Clearance/Non-Contact; Pilot Pressure:Round; Pressurefree Operation:46800 lb; Maximum angular acceleration:Solid Pillow Block; Power:55700 lb; Control Fluid Drain:3.2500 in; Sequence Valve:2800 RPM; Control Pressure Measurement:Cast Iron; Rotary stiffness:Lubrication Fitting; Maximum Permissible Pilot Pressure:Double Concentric Collar; Drive Speed:5000; Moment of inertia rotary group:8-1/8 in; Determining Operating Characteristics:ANSI/ABMA STD 9-1990; |
4535V50A30-1CA22R Vickers Gear pumps imported with original packaging | Control Pressure Measurement:2.9375 in; Flow:3-3/16 in; Displacement, geometric, per revolution:10.4375 in; Rate Of Pressure Change:Non-Expansion Bearing (Fixed); Maximum Permissible Pilot Pressure:6.4375 in; Maximum rotational speed:Powder Coated; Maximum Volume Flow:Two-Bolt Base; Determining Operating Characteristics:4-7/8 in; Maximum Permissible Speed (limit Speed):Spherical Roller; Pilot Pressure:Clearance/Non-Contact; Torque:Round; Drive Speed:46800 lb; Sequence Valve:Solid Pillow Block; Nominal Resistance:55700 lb; Drive Power:3.2500 in; Weight (approx.):2800 RPM; Power:Cast Iron; Moment of inertia rotary group:Lubrication Fitting; Maximum Axial Force At Standstill:Double Concentric Collar; Load Pressure:5000; Control Fluid Drain:8-1/8 in; Case volume:ANSI/ABMA STD 9-1990; |
22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging | Maximum Axial Force At Standstill:2.9375 in; Maximum Permissible Pilot Pressure:3-3/16 in; Power:10.4375 in; Maximum Torque:Non-Expansion Bearing (Fixed); Voltage:6.4375 in; Torque:Powder Coated; Flow:Two-Bolt Base; Drive Speed:4-7/8 in; Weight (approx.):Spherical Roller; Pilot Pressure:Clearance/Non-Contact; Drive Power:Round; Maximum angular acceleration:46800 lb; Load Pressure:Solid Pillow Block; Displacement, geometric, per revolution:55700 lb; Maximum rotational speed:3.2500 in; Pressurefree Operation:2800 RPM; Case volume:Cast Iron; Rate Of Pressure Change:Lubrication Fitting; Control Pressure Measurement:Double Concentric Collar; Nominal Resistance:5000; Sequence Valve:8-1/8 in; Rotary stiffness:ANSI/ABMA STD 9-1990; |
4535V45A35-1DA22R Vickers Gear pumps imported with original packaging | Drive Speed:2.9375 in; Maximum rotational speed:3-3/16 in; Weight (approx.):10.4375 in; Case volume:Non-Expansion Bearing (Fixed); Maximum Axial Force At Standstill:6.4375 in; Control Fluid Drain:Powder Coated; Moment of inertia rotary group:Two-Bolt Base; Voltage:4-7/8 in; Maximum Torque:Spherical Roller; Pressurefree Operation:Clearance/Non-Contact; Flow:Round; Rotary stiffness:46800 lb; Nominal Resistance:Solid Pillow Block; Maximum Volume Flow:55700 lb; Pilot Pressure:3.2500 in; Maximum Permissible Pilot Pressure:2800 RPM; Load Pressure:Cast Iron; Sequence Valve:Lubrication Fitting; Rate Of Pressure Change:Double Concentric Collar; Maximum angular acceleration:5000; Torque:8-1/8 in; Power:ANSI/ABMA STD 9-1990; |
4535V50A35-1CA22R Vickers Gear pumps imported with original packaging | Power:2.9375 in; Control Pressure Measurement:3-3/16 in; Determining Operating Characteristics:10.4375 in; Case volume:Non-Expansion Bearing (Fixed); Displacement, geometric, per revolution:6.4375 in; Maximum Torque:Powder Coated; Moment of inertia rotary group:Two-Bolt Base; Nominal Resistance:4-7/8 in; Maximum Volume Flow:Spherical Roller; Maximum Axial Force At Standstill:Clearance/Non-Contact; Sequence Valve:Round; Drive Power:46800 lb; Load Pressure:Solid Pillow Block; Voltage:55700 lb; Torque:3.2500 in; Flow:2800 RPM; Drive Speed:Cast Iron; Rate Of Pressure Change:Lubrication Fitting; Control Fluid Drain:Double Concentric Collar; Weight (approx.):5000; Pressurefree Operation:8-1/8 in; Pilot Pressure:ANSI/ABMA STD 9-1990; |
4535V50A25-1CA22R Vickers Gear pumps imported with original packaging | Pilot Pressure:2.9375 in; Drive Power:3-3/16 in; Drive Speed:10.4375 in; Maximum Axial Force At Standstill:Non-Expansion Bearing (Fixed); Control Fluid Drain:6.4375 in; Maximum angular acceleration:Powder Coated; Weight (approx.):Two-Bolt Base; Nominal Resistance:4-7/8 in; Maximum rotational speed:Spherical Roller; Maximum Permissible Speed (limit Speed):Clearance/Non-Contact; Load Pressure:Round; Maximum Volume Flow:46800 lb; Case volume:Solid Pillow Block; Maximum Permissible Pilot Pressure:55700 lb; Displacement, geometric, per revolution:3.2500 in; Rotary stiffness:2800 RPM; Moment of inertia rotary group:Cast Iron; Maximum Torque:Lubrication Fitting; Pressurefree Operation:Double Concentric Collar; Power:5000; Voltage:8-1/8 in; Sequence Valve:ANSI/ABMA STD 9-1990; |
4535V45A38-1DA22R Vickers Gear pumps imported with original packaging | Torque:2.9375 in; Nominal Resistance:3-3/16 in; Rate Of Pressure Change:10.4375 in; Pilot Pressure:Non-Expansion Bearing (Fixed); Control Fluid Drain:6.4375 in; Load Pressure:Powder Coated; Maximum angular acceleration:Two-Bolt Base; Maximum Volume Flow:4-7/8 in; Weight (approx.):Spherical Roller; Maximum Permissible Pilot Pressure:Clearance/Non-Contact; Flow:Round; Maximum rotational speed:46800 lb; Maximum Axial Force At Standstill:Solid Pillow Block; Rotary stiffness:55700 lb; Sequence Valve:3.2500 in; Maximum Torque:2800 RPM; Control Pressure Measurement:Cast Iron; Power:Lubrication Fitting; Voltage:Double Concentric Collar; Maximum Permissible Speed (limit Speed):5000; Pressurefree Operation:8-1/8 in; Drive Power:ANSI/ABMA STD 9-1990; |
4535V50A38-1CA22R Vickers Gear pumps imported with original packaging | Weight (approx.):2.9375 in; Flow:3-3/16 in; Case volume:10.4375 in; Load Pressure:Non-Expansion Bearing (Fixed); Pressurefree Operation:6.4375 in; Nominal Resistance:Powder Coated; Moment of inertia rotary group:Two-Bolt Base; Maximum Torque:4-7/8 in; Determining Operating Characteristics:Spherical Roller; Voltage:Clearance/Non-Contact; Control Pressure Measurement:Round; Maximum rotational speed:46800 lb; Pilot Pressure:Solid Pillow Block; Drive Speed:55700 lb; Maximum Volume Flow:3.2500 in; Drive Power:2800 RPM; Sequence Valve:Cast Iron; Torque:Lubrication Fitting; Maximum Permissible Pilot Pressure:Double Concentric Collar; Maximum Axial Force At Standstill:5000; Maximum Permissible Speed (limit Speed):8-1/8 in; Rotary stiffness:ANSI/ABMA STD 9-1990; |
20V-4A-1C-22R Vickers Gear pumps imported with original packaging Video
Contact Us
- Sydffk Pump Inc.
- AddressPO Box 467, Sugarcreek, OH 44682
- Phone(Working Time)(330) 473-1023
Vickers Vane pumps CATEGORIES
- Daikin Hydraulic Piston Pump VZ series
- Original Rexroth AZPF series Gear Pump
- Original Rexroth AEAA4VSO Series Piston Pump
- Original Rexroth AAA10VSO Series Piston Pump
- Original Rexroth A2FO Series Piston Pump
- Daikin Hydraulic Vane Pump DV series
- Original Rexroth AZPU series Gear Pump
- Original Rexroth AZPGG series Gear Pump
- Original Rexroth AHAA4VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DP series
- Original Rexroth A11VO series Piston Pump
- Original Rexroth PGH series Gear Pump
- Daikin Hydraulic Piston Pump VR series
- Original Rexroth AZPS series Gear Pump
- Original Rexroth A10VSO Series Piston Pump
- Daikin Hydraulic Vane Pump DS series
- Original Rexroth AA10VSO Series Piston Pump
- Original Rexroth AA4VSO Series Piston Pump
- Original Rexroth A10VG series Piston Pump
- Original Rexroth A10VO Series Piston Pump
- Original Rexroth AAA4VSO Series Piston Pump
- Original Rexroth AZPJ series Gear Pump
- Original Rexroth AZPGF series Gear Pump
- Original Rexroth AZMF series Gear Pump
- Original Rexroth PGF series Gear Pump
- Daikin Hydraulic Rotor Pump DR series
- Original Rexroth AA10VO Series Piston Pump
- Original Rexroth A4VSO Series Piston Pump
- Parker Piston pump PVAP series
- Vickers Vane pumps
- Vickers Variable piston pumps PVH Series
- Yuken Vane pump 50F Series
- Parker Brand vane pump PVS Series
- Parker Piston pump PV360 series
- Vickers Gear Pump
- Vickers Variable piston pumps PVM Series
- Parker Piston pump PV080 series
- Yuken Pistonp Pump AR Series
- Parker Piston pump PV040 series
- Yuken Vane pump PV2R Series
- Parker Piston pump PV270 series
- Parker Piston pump PV140 series
- Parker Piston pump PV032 series
- Parker Piston pump PAVC series
- Parker Piston pump PV016 series
- Vickers Variable piston pumps PVE Series
- Parker Vane pump PFVH series
- Parker Piston pump PV076 series
- Parker PV180 series Piston pump
- Parker Brand vane pump PVD Series
- Yuken Pistonp Pump A3H Series
- Vickers Variable piston pumps PVB Series
- Yuken Vane pump S-PV2R Series
- Vickers Variable piston pumps PVQ Series
- Parker Piston pump PV020 series
- Yuken Vane pump 50T Series
- Parker Piston pump PV063 series
- Parker Piston pump PVP series
- Parker PV092 series Piston pump
- Yuken Vane pump 150T Series
- Yuken Pistonp Pump A Series
- Yuken Pistonp Pump PV11R Series
- Parker Piston pump PV046 series
- Hydraulic Vane Pump
- Oil Pump
- Hydraulic Valve
- Hydraulic Piston Pump/Motor
- Hydraulic Gear Pump
- Hydraulic Gear Pump
- Hydraulic Vane Pump
- Hydraulic Piston Pump/Motor
- Hydraulic Valve
- Oil Pump
Customers Who Viewed Vickers 20V-4A-1C-22R Also Viewed
- 22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging
- 4535V45A30-1BA22R Vickers Gear pumps imported with original packaging
- 4535V50A38-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A35-1CA22R Vickers Gear pumps imported with original packaging
- 4535V50A30-1CA22R Vickers Gear pumps imported with original packaging
All Groups